The Sunlift Boat Lift is the leading free-standing hydraulic boat lift
worldwide, and is credited for converting the industry from cables to
hydraulics.
Operating the quiet, high-speed hydraulics with the remote control from the helm
of the boat provides ultimate convenience and safety. Lifts in seconds instead
of minutes.
Only Sunstream
Boat Lift
offers lifts designed for fresh and salt water, with the best warranty on both
frame and hydraulics. Sunstream’s patented Superbunks; eliminates wood and
carpet and provides superior long-lasting support. Sunstream also is the only
company using stainless rams and scrapers on hydraulics. All marine-grade
aluminum and stainless steel construction.
|
Sunlift Boat Lift Photos
|
The Sunlift Boat Lift is hidden under your boat, which proudly displays
your boat on a pedestal. Rubber Superbunks prevent mold, and does not wear or
retain grit like carpet on other boat lifts.
|
- SL2006AR
2000 lbs/907 kg |
The SL2006 Boat Lift, or Sunlift Mini, is the ultimate PWC
lift, and can be used for a variety of small boats.
With the SunLift Mini, using small crafts is now
easier than ever before and enthusiasts are having
more fun, more often. The Mini is easy to use and
operates with a waterproof remote-control, or a
wired pendant. Lifting speeds average 15 seconds so
you are in and out of the water in no time at all.
The bunks slope as the lift is lowered to make your
return landing easier and the over-center gravity
lock assures you that your water craft is safe while
you are away from the dock. The lifting range can be
adjusted from the standard three foot , to a four or
five foot range, using the Range Extensions.
NOTE: The capacity is reduced to 1,800 lbs when the
extensions are used. For small boats over 13’, use the SL2008AR, which
has longer bunks |
| |
|
|
- SL2008AR
2000 lbs/907 kg |
The SL2008 Boat Lift is identical to the SL2006, but
operates with eight foot bunks opposed to the six
foot bunks used on the SL2006. This lift is ideal
for long, but lightweight dinghies, such as a 15’
aluminum fishing boat with a small outboard. See the
SL2006AR description for more detail. |
| |
|
|
- SL3010
3000 lbs/1361 kg |
The SL3010 Boat Lift is designed for light
runabouts, typically under 19’, or
pontoon boats. The single cylinder
design lifts and lowers in only
about 15 seconds. You have a choice
of remote control or a wired pendant
to operate the lift. The bunks slope
as the lift is lowered to make
landing easier and the over-center
lock gives you piece of mind that
your boat is safe. |
| |
|
|
- SL4010AR
4000 lbs/1814 kg |
The SL4010AR Boat Lift is a popular model, since it lifts
up to about a 20’ boat. The dual cylinder design
makes this lift a rugged workhouse, and provides
additional clearance for skegs of ski boats. The
bunks slope as the lift is lowered to make landing
easier and the over-center lock gives you piece of
mind that your boat is safe. The design allows for
shallow-water use, but Shallow-Water Rollers can be
added for even less depth, The foot can be bolted
directly to the cross-beam when leg-length is not
required. The lift comes standard with a four foot
lifting range; however, a five and six foot range is
available using Range Extensions. The lift can also
be modified for three foot range. Pontoon boats can
typically be lifted with the bunks under the deck
structure. Remote control comes standard. |
| |
|
|
- SL6012AR
6000 lbs/2722 kg |
The SL6012AR Boat Lift handles a wide variety of sport
boats, ski boats and fishing boats. The lift is
similar to the SL4010AR, using twin cylinders, but
it is two feet longer, and has a beefier structure.
The design allows for shallow-water use, but
Shallow-Water Rollers can be added for even less
depth, The lift comes standard with a four foot
range; however, a five and six foot range is
available using Range Extensions. The lift can also
be modified for a three foot range. The design
allows for shallow-water use, but Shallow-Water
Rollers can be added for even less depth. The foot
can be bolted directly to the cross-beam when
leg-length is not required.
The bunks slope as the lift is lowered to make
landing easier, and the over-center lock gives you
piece of mind that your boat is safe. Guide-ons or
Load-Guides are recommended to make docking as easy
as a Disney ride. Boats with stern drives or
outboards can use a motor stop to position the boat
exactly on the lift every time. Remote control comes
standard
|
| |
|
| - SL8012ER
8000 lbs/3629 kg |
The SL8012 Boat Lift is the smallest member of
the big lift family. Typically used for
boats up to 26’, depending on boat
weight. this four cylinder design
distributes the load evenly and provides
superior strength and stiffness. The
standard range is five feet; however a
special order XR model is available with
a six foot range. |
| |
|
|
- SL10014ER
10000 lbs/4535 kg |
The
SL10014 Boat Lift is the most popular of the
larger Sunlifts. It handles a large
range of boat types, typically up to
30’, depending on boat weight. The four
cylinder, two Superbunk design
distributes the load evenly and provides
superior strength and stiffness. The
standard lifting range is five feet, and
a special order XR model is available in
a six foot range, which reduces the
lifting capacity to 9,500lbs. |
| |
|
|
- SL12018ER
12000 lbs/5443 kg |
The SL12018 Boat Lift is not only higher capacity, but is
four feet longer than the SL10014. The lift has four
adjustable SuperBunks, ideal for the larger boats
that have more complexity. The four cylinder design
distributes the load evenly and provides superior
strength and stiffness. The standard range is five
feet, and a special order XR model is available in a
six foot range, with a reduced lifting capacity of
9,500lbs. |
| |
|
|
- SL18020AR
18000 lbs/8165 kg |
The SL18020 Boat Lift is a six cylinder lift with three
lifting arms designed for boats up to 40’, depending
on boat weight. The design uses six adjustable Superbunks. The lift uses a 24V hydraulic powerpack
with two 12V batteries for extra speed and power.
The standard range is five feet, and a special order
XR model is available in a six foot range, with a
reduced lifting capacity of 14,250lbs |
| |
|
|
- SL24022ER
24000 lbs/10886 kg |
The SL24022ER Boat Lift is a massive lift for boats up to
24,000lbs. The design uses eight adjustable Superbunks, eight cylinders and four lifting arms.
The lift uses a 24V hydraulic powerpack with two 12V
batteries for extra speed and power. The standard
range is five feet, and a special order XR model is
available in a six foot range, with a reduced
lifting capacity of 19,000lbs. |
| |
|
View Photos of our Sunlift Boat Lifts in Action
|
Tennessee Boat Lifts 2008